How to Maintain a Semi-Automatic BOV Aerosol Filling Machine
2026-10-08
Regular maintenance is important for keeping a semi-automatic BOV aerosol filling machine running safely and reliably. Proper maintenance can help reduce equipment downtime, extend the service life of components, and maintain stable filling performance.
Follow these basic maintenance tips for daily use and long-term storage.
1. Make Sure the Machine Is Properly Grounded
After installation, make sure the machine is reliably grounded before operation.
Proper grounding helps improve electrical safety and protects the equipment during operation.
2. Do Not Modify the Electrical System Without Authorization
Only trained and qualified personnel should maintain the electrical system of the machine.
Do not randomly adjust or modify electrical components, wiring, or control parameters.
If you are not familiar with the machine's operation, do not change settings on the touchscreen without confirming the correct parameters. Incorrect settings may affect machine operation or cause equipment damage.
3. Check the Lubricating Oil Before Operation
Before starting the machine, check the lubricating oil in the air preparation unit.
Make sure there is sufficient oil for the pneumatic system.
If the oil level is too low, add the appropriate lubricating oil before operating the machine.
4. Lubricate Moving Parts Regularly
During operation, regularly check the lubrication condition of the machine's moving parts.
Add an appropriate amount of lubricating grease or oil when necessary.
Regular lubrication helps reduce friction and wear and keeps moving components operating smoothly.
5. Check Screws and Connections
Regularly inspect the machine's connecting screws, nuts, and other fasteners.
Vibration during long-term operation may cause some connections to become loose.
If any loose screws or nuts are found, tighten them before continuing production.
6. Turn Off the Power and Air Supply After Work
At the end of the working day:
Turn off the machine's power supply.
Shut off the compressed air supply.
Make sure the machine is in a safe and stopped condition.
This helps improve safety and reduces unnecessary energy consumption.
7. Maintain the Machine During Long-Term Shutdown
If the machine will not be used for an extended period, clean and wipe the external surfaces of the equipment.
Apply an appropriate amount of anti-rust grease to relevant metal surfaces when necessary to help prevent rust and corrosion.
Store the machine in a clean and dry environment.
8. Power on the Machine Regularly During Long-Term Storage
If the machine remains unused for a long period, it is recommended to power on the equipment periodically.
Turn on the power switch to allow the control system to operate and charge its internal battery, if equipped.
Regular power-up can help prevent the control system battery from becoming fully discharged and reduce the risk of program or parameter loss.
Simple Maintenance Checklist
(1) For convenient daily maintenance, remember:
Ground → Check lubrication → Lubricate moving parts → Tighten loose connections → Clean the machine → Turn off power and air supply
(2) For long-term shutdown:
Clean → Apply anti-rust protection → Store properly → Power on periodically
Regular maintenance helps keep your semi-automatic BOV aerosol filling machine operating safely and efficiently for a longer service life.
Note: Maintenance procedures and lubrication requirements may vary depending on the specific machine configuration. Always follow the maintenance instructions provided by the manufacturer.


